Filter
Top Products
Basic Operations 40
Positioning the Pressure Rollers and Media (S70675, S50675)
Pressure rollers must be set in the correct position to obtain good print results.
Positioning of media
There are square holes to indicate the pressure roller positions on the rear side of the
printer.
Observe the following cautions when positioning media to ensure that the positioning of
pressure rollers is appropriate for the media width.
❏ Ensure that the left edge of the media always passes within the range of 1.
❏ The right edge of the media must pass within the squares of 2 through 8 according to
the media width.
* Transparent film, white film, and ink layering are not supported for these widths.