I/O Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
33
The G48Tc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
● POE present
For information about the LEDs and their activity on the G48Tc I/O module, see “I/O Module LEDs”
on page 38.
10G4Xc I/O Module
The 10G4Xc I/O module (Figure 17) has four unpopulated XFP-based 10-gigabit Ethernet ports.
Figure 17: 10G4Xc I/O Module
The default configuration of the 10G4Xc I/O module is as follows. All ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4Xc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 10G4Xc I/O module, see “I/O Module LEDs”
on page 38.
10G4Xc
10G4Xc
10GBASE-X XFP
41614
Module status LEDs
10 Gbs ports
BD_155