Filter
Top Products
Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
74
6 At each side of the chassis, place one hand in an empty power supply bay and the other hand in the
recessed hand-hold on the back panel of the chassis. Carefully lift the BlackDiamond 8806 chassis off
the foam cushion and onto the floor (see Figure 37).
Figure 37: Correct Method for Lifting the BlackDiamond 8806 Chassis
CAUTION
Do not use the fan tray handle to lift or maneuver the BlackDiamond 8806 chassis. This handle is not designed to
support the weight of the chassis.
Verify that the following items are included in the shipping carton:
● BlackDiamond 8806 chassis with four installed blank front panels
● Power cord retaining bracket
● 19-inch helper bracket (installation tray)
● BlackDiamond documentation pack with ESD-preventive wrist strap
NOTE
Save all packaging, clip locks, and box pieces for future use in the event that the BlackDiamond 8806 chassis must
be moved to another location or returned to Extreme Networks, Inc.
EX_112