Extreme Networks 8800 Series Switch User Manual


 
Site Preparation
BlackDiamond 8800 Series Switches Hardware Installation Guide
64
* Proprietary to Extreme Networks. Connections between two Extreme Networks 1000BASE-LX interfaces that use 10/125 μm
single-mode fiber can use a maximum distance of 10,000 meters.
RJ-45 Connector Jackets
Use RJ-45 cable with connector jackets that are flush with the connector or that have connectors with a
no-snag feature.
Using cable with jackets that are wider than the connectors can cause:
Connectors that are not properly aligned with the port.
Crowded cable installation, which can cause connectors to pop out of the port.
Figure 33 shows examples of connector jacket types that are not recommended, as well as those that are
recommended.
Figure 33: RJ-45 Connector Jacket Types
1000BASE-T
100BASE-TX
10BASE-T
Category 5 and higher UTP cable
Category 5 and higher UTP cable
Category 3 and higher UTP cable
100
100
100
Table 12: Media Types and Maximum Distances (Continued)
Standard Media Type
Mhz•Km
Rating
Maximum Distance
(Meters)
0.1" = 1mm actual
39.37% : 254%
SPG_001
Not recommended
Better
Best