Filter
Top Products
Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
84
To ground the chassis:
1 Locate the grounding point on the back of the chassis (Figure 48 and Figure 49).
Figure 48: Back of BlackDiamond 8806 Chassis
Figure 49: Back of BlackDiamond 8810 Chassis
2 Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
3 Insert the stripped wire into the cable lug.
EX_128A
Grounding point
PSU / fan
controllers
ASP044A
Grounding point
PSU/Fan
controllers