Filter
Top Products
SW2 DP • Remote Configuration and Control 17
17
17
Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Input Selection
Select an input (video and audio)
X!
! In
X!
* All
]
Select audio (if available) and video
input
X!
.
X!
= input number: 0 through 2.
0 = deselect (mute) all inputs.
Video Mute
Video mute
X@
B Vmt
X@
]
Mute or unmute the video signal. For
X@
:
1
= mute
0 = unmute
View video mute status
B
X@
]
Show video mute status
X@
.
Audio Mute
Audio mute
X@
Z Amt
X@
]
Mute the audio signal. For
X@
:
1
= mute
0 = unmute
View audio mute status
Z
X@
]
Show audio mute status
X@
.
Signal Status
Request all signal status
E
LS
}
Sig
X@
*
X@
*
X@
]
Show the presence or absence of a
signal at each input and the output in
the following format:
Input1 [Input2]*Output
Inputs are shown in numerical order.
X@
= signal status. For
X@
:
1
= signal present
0 = signal not present
HDCP
HDCP Authorized device on
E
E 1 HDCP
}
hdcp E 1
]
HDCP authorized device on
HDCP authorized device off
E
E 0 HDCP
}
hdcp E 0
]
HDCP authorized device off
View HDCP authorization status
E
E HDCP
} X@
]
Show the HDCP device status.
EDID Minder
View EDID native resolution
E
N * EDID
} X$
]
Show the native resolution
X$
of the
current EDID.
Example: 1020x1080 @ 60 Hz
View EDID in Hex
E
R * EDID
} X%
]
View the current EDID information
X%
in hexadecimal (256 bytes).
Front Panel Lockout (Executive Mode)
Enable and disable lock mode
X@
X Exe
X@
]
For
X@
:
1
= lock front panel
0 = unlock front panel (default)
View lockout status
X
X@
]
Show lock mode on/off status.