Filter
Top Products
SW2 DP • Reference Information 29
29
29
29
Figure 22. Attaching the Back of the Rack Mounting Brackets
4. Mount the switcher to the rack support, using the two included rack screws.
MAV SERIES
AV MATRIX SWITCHER
I/O
AUD
AUDIO SETUP
PRESET
VID
IR
+dB
-dB
ENTER
2
7
6
5
2
4
1
INPUTS
OUTPUTS
8
3
1
8
6
5
4
3
7
Figure 23. Mounting an SW2 DP to a Back of the Rack Support
Furniture Mounting
To mount an SW2 DP switcher under a desk, table, or podium, use the optional MBU 123
Mini Under-Desk Mounting Kit as follows:
1. If rubber feet were previously attached to the bottom of the unit, remove them.
2. Remove the two screws from each side of the switcher. Retain the screws for possible
reassembly later.
3. Attach the brackets to the sides of the unit, using the provided machine screws.