Extron electronic SW2 DP Switch User Manual


 
vSW2 DP • Contents
Introduction............................................................ 1
About this Guide ................................................ 1
About the SW2 DP.............................................. 1
Features .............................................................. 1
Application Diagram ........................................... 2
Installation ............................................................. 3
Installation Overview ........................................... 3
Rear Panel Features ............................................. 4
Wiring for RS-232 Control .................................. 5
Connecting to the USB Port ................................ 6
Enabling Auto-input Switching............................ 8
Wiring the DisplayPort Connectors ...................... 8
Wiring the Power Connector (Optional) .............. 9
Operation ............................................................. 11
Front Panel Features .......................................... 11
Operations ....................................................... 12
Powering On the Switcher ............................ 12
Selecting an Input ......................................... 12
Enabling Front Panel Lockout
(Executive Mode) ......................................... 13
Resetting ...................................................... 13
EDID Minder ................................................. 13
Remote Configuration and Control ................ 15
Using Simple Instruction Set (SIS) Commands .... 15
Host-to-switcher Communications ................ 15
Switcher-initiated Messages .......................... 15
Error Responses............................................. 16
Using the Command and Response Table ...... 16
Symbol Definitions ........................................ 16
Command and Response Table for SIS
Commands .................................................. 17
Updating Firmware Using Firmware Loader ....... 19
Downloading and Installing Firmware
Loader ......................................................... 19
Downloading the SW2 DP Firmware.............. 20
Loading the Firmware to the Switcher ........... 20
Reference Information ....................................... 26
Part Numbers .................................................... 26
Included Parts ............................................... 26
Accessories ................................................... 26
Cables and Adapters ..................................... 27
Mounting the SW2 DP Switcher ........................ 27
Rack Mounting ............................................. 27
Furniture Mounting ....................................... 29
Contents