Filter
Top Products
SW2 DP • Remote Configuration and Control 21
21
21
Figure 14. Connection Method Menu on the Add Device Window
6. Depending on the connection method that you selected, additional options appear.
Make the appropriate selections for your connection method.
• RS-232: Select the appropriate options from the Com Port and Baud Rate menus
(this information is provided by your system administrator).
Figure 15. RS-232 Drop-down Menus on Add Device Window
• USB: Only the Extron USB Device_0 option is available on the Available
Devices menu. Make sure that it is selected.
7. Click Connect. If the connection is successful, SW2 DP appears in green in the
Connected Device section, followed by a green check mark (see figure 17 on page 23).
8. Click the Browse button in the New Firmware File (Optional) section.
9. On the Open window, navigate to the new firmware file, which has an S19 extension,
and double-click it.