Filter
Top Products
*If the roll media must be moved to the left
Turn the scroller adjusting screw at the rear left side of the printer to the right
• The guide line (holes) is a guide
There is a possibility of a media jam if the pressure roller is not
holding the left edge of the media and the pressure roller is
near the right edge. Either hold the left edge of the media com-
pletely with the pressure roller or slide it so that pressure roller
is about 5 mm away from the right edge of the media and the
right edge of the media is within 5 mm to the left or right of the
guide line (holes).
44
RJ-6000 Series USER GUIDE Basic Edition
Loading the Media
Loading Roll Media
Scroller Adjusting
Screw
When moving
the roll media to
the left
IMPORTANT