Filter
Top Products
Make a test print to verify that the printer is working properly.
Step 1
Open the cover and check that the hold lever is up.
Step 2
Press the [MEDIA] key to light the Sheet media LED. (Cut media is selected)
Step 3
Load an A3 size sheet of cut media and
put the hold lever down.
Step 4
After initialization has finished, press
the [Test Print] key (RESOLUTION,
VALUE key) while you are pressing the
[shift] key.(Test print: pale blue)
Test print sample (paste your test print on this page)
Making a Test Print
47
RJ-6000 Series USER GUIDE Basic Edition
Preparing for Printing
Pr int ing
Plot OK
• If you are unable to
make a test print like
the above sample,
contact your local
Mutoh dealer.
NOTE
Paste your test print on this bordered Paste your test print on this bordered