Filter
Top Products
When the head is cleaned and the type of ink is changed frequently, waste
matter clinging to the cleaning wiper may cause the printing to become faint or
blemished. In such cases, you should clean the cleaning wiper.
Step 1
Switch off the power, lower the hold lever and bring the head to the middle.
• Don't move the head with the hold lever up. The head and
media keeper blade may touch, causing damage and poor print-
ing quality.
Step 2
Clean the cleaning wiper backwards and forwards two or three times with the
cloth for cleaning the cleaning wiper (an accessory item).
• Clean without your hand coming into direct contact with the
head cap unit, which is near the cleaning wiper. Otherwise oil
may get on the cleaning wiper and it will be unable to clean the
head properly.
• Don't lift up the cleaning wiper when you are cleaning it.
Otherwise it be unable to clean the head properly.
• The cleaning wiper and its surroundings will be soiled with
waste liquid. Be careful not to dirty your hands and clothes.
Cleaning the Cleaning Wiper
89
RJ-6000 Series USER GUIDE Basic Edition
Daily Maintenance
CAUTION
Head Cap Unit
Cleaning Wiper
CAUTION