Falcon RJ600EX-A-01 Printer User Manual


 
Step 3
* Press [ENTER] to proceed with the setting
* The part of the display that is flashing can be altered. To change a setting,
select a value by pressing the [VALUE +] or [VALUE -] keys.
* The setting will not change unless the [ENTER] key is pressed.
* If the set-up is complete, press the [Menu Up] key. If there is no key opera-
tion in Menu setting mode for 3 minutes, Direct access key input standby
(permanent display) is restored.
73
RJ-6000 Series USER GUIDE Basic Edition
Menu Mode Operation
Menus