Filter
Top Products
IBM Proprinter XL24E Emulation
User’s Manual B-19
COMMAND
SETS
Table B–3 Printer commands for the IBM Proprinter XL24E emulation (Continued)
Function Command
Condensed characters on
Condensed and elite characters off
Subscript or superscript printing on
(subscript: n = 1, superscript: n = 0)
Subscript and superscript printing off
Underline on or off (on: n = 1, off: n = 0)
Overline on or off (on: n = 1, off: n = 0)
SI or ESC SI
DC2
ESC S (n)
ESC T
ESC - (n)
ESC_(n)
Horizontal Control
Space
Backspace
Carriage return
Elite characters on
Proportionally spaced characters on or off
(on: n = 1, off: n = 0)
SP
BS
CR
ESC :
ESC P (n)
Vertical Control
Line feed
Form feed
Advance paper n/216 inch (1 ≤ n ≤ 255)
Advance paper n/180 inch (in AG mode) (1 ≤ n ≤ 255)
Set line spacing to 1/8 line
Set line spacing to 7/72 inch
Set line spacing to n/216 inch (0 ≤ n ≤ 255)
Set line spacing to n/180 inch (in AG mode) (0 ≤ n ≤ 255)
Preset line spacing to n/72 inch (1 ≤ n ≤ 255)
Preset line spacing to n/60 inch (in AG mode) (1 ≤ n ≤ 255)
Set line spacing to 1/6 inch or to the value
preset by line spacing command ESC A (n)
Change graphics line spacing base to
1/216 or 1/180 inch (for ESC J and ESC 3)
m
1
= 4, m
2
= 0
0 ≤ t
1
≤ 255, 0 ≤ t
2
≤ 255, t
3
= 0, t
4
= 180 or 216
LF
FF
ESC J (n)
ESC J (n)
ESC 0
ESC 1
ESC 3 (n)
ESC 3 (n)
ESC A (n)
ESC A (n)
ESC 2
ESC [ \ (m
1
) (m
2
)
(t
1
) ... (t
4
)
DL6400/6600 Book Page 19 Thursday, September 21, 2000 7:52 PM