Filter
Top Products
Labels
7-10 User’s Manual
4. Print area
The figure below shows the print area on cut sheets.
Only labels on the front of continuous forms backing sheets can be
printed.
1. Size
Paper size specifications are the same as for general continuous
forms.
2. Paper thickness
The label and backing sheet together must be 0.2 mm (1/27 in) or
less.
Area Size in mm (in)
Front Rear
(DL6600 Pro only)
A 4.2 (0.17) 8.5 (0.33)
B 4.2 (0.17) 8.5 (0.33)
C
*1
5.1 (0.2) to 38 (1.5) or
more
D 5.1 (0.2) or more
*1 For wide paper, this specification is as follows:
406.4 mm (16 in) wide: 22.5 to 38.5 mm (0.9 to 1.5 in)
419 mm (16.5 in) wide: 36 to 38.5 mm (1.4 to 1.5 in)
Print area
A
B
C
D
90 to 419 mm
(3.5 to 16.5 in)
Labels
DL6400/6600 Book Page 10 Thursday, September 21, 2000 7:52 PM