Filter
Top Products
105
4.1 Cleaning Materials and Areas Requiring Cleaning
4
DAILY CARE
■ Locations requiring Cleaning and Cleaning
Frequency
The following shows the standard cleaning frequency for each area requiring cleaning.
*1)During scanning, toner, paper dust, oil from carbonless paper, and glue stick to scanner
rollers. If the rollers are not cleaned regularly, these will become more difficult to remove.
Therefore, it is strongly recommended that the rollers be cleaned after daily use.
cleaning method cleaning sheet cloth moistened with
cleaner F1
cleaning cycle every 10,000 scanned
pages (*1)
every 10,000 scanned
pages (*1)
Pad
3
Pick rollers
33
Brake roller
33
Separator rollers
33
Feed roller
33
Pinch roller
33
Transport path
33
Glass
3
Skew-detection sensor
3
Document sensors
3
ATTENTION
• The scanner must be cleaned more frequently if you scan any of the fol-
lowing types of sheets:
• Documents of coated paper
• Documents that are almost completely covered with printed text
or graphics
• Paper whose back side has carbon.
• Chemically treated documents such as carbonless paper
• Documents containing a large amount of calcium carbonate
• Documents filled in with pencil
• Do not use aerosol sprays to clean the scanner. The air from the spray
may cause dirt and dust to enter the scanner mechanism and resulting
scanner failure or malfunction.
• You must clean the following area more thoroughly when you use fi-
590PRF or fi-590PRB imprinters. The imprinter ink tends to stick to the
document transport path.
• Removable sheet guide
• Glass sheet guide
• Feed rollers
• Pinch rollers
• You can confirm the number of scanned sheets after the last cleaning
by “5.2 How to check and reset the Consumable/Cleaning Counter” on
page 121.