Filter
Top Products
48
2.13 Configuring the Scan Settings
Mode
Select a color mode suitable for the purpose from the menu.
[Setup IPC] button
You can configure settings for scanning with Image Processing Software Option.
Dots per inch
Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or input a number from 50 to 600.
The higher the resolution, the more memory is required.
Image Processing Scans data in binary (black and white) using Image Processing Soft-
ware Option. When this mode is selected, the [Setup IPC...] button
below becomes available.
(Note that only when Image Processing Software Option is installed in
the computer, it is displayed.)
Black and White Scans data in binary (black and white). Distinguishes black from white
according to the fixed threshold. This scanning mode is suitable for
scanning line drawings and text documents.
16-level Gray Scans data with 16 gradations from black to white. This mode uses 4
bits per pixel.
256-level Gray Scans data with 256 gradations from black to white. This mode uses 8
bits per pixel.
24-bit Color Scans data as full-color images using 24 bits per pixel. This mode is
suitable for scanning color photographs. However, more memory space
is needed compared to gray scale scanning.
Auto Detect 16-/256-
level, Auto Detect
24-bit Color
Distinguishes between color data and black and white data, and outputs
documents as they are; that is, color data is output in color (or gray
scale) mode and white and black data is output in black and white
mode.
Configure settings for color documents using Front/Back Image #1, and
for black and white documents using Front/Back Image #2, under
“Camera”.
HINT
For details on how to configure settings for Image Processing Software
Option, refer to "Image Processing Software Option User's Guide".
To display the "Image Processing Software Option User's Guide", select
[Start] > [All Programs] > [Image Processing Software Option] > [User's
Guide].