30
2.10 Scanning Documents
2.10 Scanning Documents
This section explains about the basic flow of scanning operations.
In order to use the scanner to scan documents, you need a scanner driver and an application that supports
the driver.
The scanner is bundled with the TWAIN-compliant driver called "TWAIN Driver", the ISIS-compliant
driver called "ISIS Driver", the image processing software "Kofax VRS", and the "ScandAllPRO (TWAIN
driver/ISIS driver)" application which supports the "TWAIN Driver", the "ISIS Driver", and "Kofax VRS".
1. Load the documents on the hopper.
Refer to the section “2.6 Loading Documents on the Hopper” on page 17.
2. Adjust the stacker table to the document size.
HINT
• For details about the scanner drivers, refer to the following:
- “2.13 Configuring the Scan Settings” on page 43
- TWAIN Driver Help
- ISIS Driver Help
• For details about Kofax VRS, refer to the following:
- Virtual ReScan (VRS) User Guide
- Read Before Using VRS
• For details about ScandAll PRO, refer to the following:
- How to Use ScandAll PRO
- ScandAll PRO Help
ATTENTION
• When loading long documents on the hopper, extend the stacker exten-
sion.
• When loading short documents on the hopper, adjust the stacker length
with the small stopper.