Filter
Top Products
8
2.1 Turning the Scanner ON /OFF
2.1 Turning the Scanner ON /OFF
■ Turning the Power ON
1. Press “I” side of the main power switch located on the back of the
scanner.
2. Open the Hopper.
3. Press the Power button on the Operator panel.
The power turns on and the Power button lights up.
During initialization, the Function No. Display changes from “8” --> “P” to “1” in order. When
“1” shows, it means the scanner is ready.
ATTENTION
When SCSI interface is used, turn on the scanner power first. Turn on the
PC when the scanner displays “1” on the Function number display.
HINT
• Refer to “2.2 Opening and Closing the Hopper” on page 10 to open the
Hopper.
• Be sure to open the Hopper before turning on the scanner by the Power
button.
ONOFF
T
T
hi
hi
n
S
e
n
d
e
n
d
to
Scan
Scan
Function number display