Fujitsu SPFC-T901-DGFX-1 Laptop User Manual


 
Troubleshooting and tips
The notebook stops working
NotebookEnergysavi ngmode
Cause Troublesh ooting
Notebook is in energy saving mo
de.
Leave energy saving mode.
An application programme has
caused the
malfunction.
Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
Charge th e battery.
or
Insert a charged battery.
or
Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoesnotp
rint
Cause Troublesh ooting
The printer is not switched on. Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with t he printer).
The printer is not connected correctly.
Check that the d ata cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
Check that the d ata cable connecting
the notebook to the printer is properly
connected.
Check whethe
r the correct printer driver is
loaded (ref
er to the printer documentation).
The radio connection to a network does not work
Theradi
oconnectiontoanetworkdoesnotwork
Cause Troublesh ooting
The wireless component is disabled.
Switch the radio component on (see
"
Switching the wireless co mponent s o n and
off", Page 6 8).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not w ork.
Check whether the radio connection is
switched on via the software.
Furthe
r information on using the radio
compo
nent can be found in the help les.
Fujitsu Technology Solutions 119