Filter
Top Products
Working with the notebook
Removing the card
Always remove the card a ccording to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the correspon ding icon in the task bar:
► Left click on the ico n to safely remove hardware, located in the taskbar.
► Select the card you want to stop and remove.
► Press the "Enter" key.
Wait for the dialog box which tells you th at it is now safe to remove the card.
1
2
► If the eject button is lowered, you m ust
first cause the eject button to release
from the note book casing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the c ard out of the slot (2).
► Insert the card placeholder into the
slot guide.
► Carefully slid
e the placeholder for the
card as far as it
willgointotheslot.
Do not use exce
ssive force.
Loudspeakers and microphones
MicrophoneLoudspeakersBassloudspeaker(subwoofer)Volumecontrol
Information on the exact position of the speakers and microphone can be
found in "
Ports and controls", Page 9.
Please refer to chapter "
Key co mbinations", Page 43 for information on setting the volume
and also enabling/disabling the loudspeakers using key combinations.
If yo u attach an external microphone, the built-in microphone is disabled.
When you conne ct headphones or ext ernal speakers, the built-in speakers are d isabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external devices", Page 97 .
Fujitsu Technology Solutions 63