Filter
Top Products
Working with the notebook
Installing a module
► Place the modu le into the module bay so that the contacts enter first.
► Push the module into the module ba y until you feel it locking into place.
Optical drive
Opticaldrive
This pro duct contains a light emitting diode, classified in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be opened .
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data carrier. O nly handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or da maged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the optical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVD
indicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goe s out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has been inserted, b ut
instead continues to flash, this means that the drive cannot access the data c arrier.
Either the data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
56 Fujitsu Technology Solutions