Filter
Top Products
Security functions
Switch on the device using Sy stemLock
If you have an internal SmartCard reader, you can switch on the device by inserting the SmartCard.
If you switch on the device with the On/Off switch then the following message appea rs:
Insert a SmartCard.
SystemLock
► Insert your SmartCard.
Enter PIN:
► Enter your PIN.
When the following appears:
ACCESS DENIED = You have entered an incorrect PIN. After three failed attempts, the
SmartCard will be blocked and can only be enabled again by entering the PUK.
Depending on the rights assigned to your SmartCard, you can select the following
functions when this message is displayed on the screen:
F2=Setup, F3=Change PIN
If your SmartCard has the appropriate rights, you can:
F2,functionkeyF3,functionkey
F2
: start BIOS Setup.
F3
: change PIN.
If you do not select a function, the system will boot up.
Start BIOS Setup
F2
A SmartCard with the app ropriate rights must be inserted (SuperU ser, Service or Admin).
Changing PIN
It is possible to change the PIN for any initialised SmartCard.
► Press the function key
F3
.
► Enter the old PIN.
► Enter the new PIN.
A number with 4 to 8-digits is acceptable for the new P IN. For security
reasons, we recommend tha t you change the PIN for every SmartCard,
and use an 8-digit number each time.
► Confirm t
he new PIN.
Uninstall SystemLock
► Start the device.
Uninstalling
► Follow th e instructions given in sect ion "Carrying out administrator functions",
Page 91. Select "Uninstall" to uninstall SystemLock. You can now use the
device again without the need for a SmartCard.
94 Fujitsu Technology Solutions