GarrettCom MNS-6K-SECURE 14.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
236
Syntax
show gvrp - shows whether GVRP is disabled, along with the current settings for the maximum
number of VLANs and the current Primary VLAN
Syntax
gvrp <enable|disable> - enable or disable GVRP
Syntax
show-vlan – list all the VLANs (including dynamic VLANs) on the switch
Syntax set-ports port=<port|list|range> state=<learn|block|disable> - set the state of the port
to learn, block or disable for GVRP. Note the default state is disable
Syntax static vlan=<VID> - convert a dynamic VLAN to a static VLAN
Syntax set-forbid vlan=<tag vlanid> forbid=<port-number|list|range> - sets the forbid GVRP
capability on the ports specified
Syntax show-forbid – display the ports with GVRP forbid capabilities
Magnum6K25# gvrp
Magnum6K25(gvrp)#show gvrp
GVRP Status : Enabled
Magnum6K25(gvrp)##gvrp disable
GVRP is now disabled
Magnum6K25(gvrp)##gvrp enable
GVRP enabled
Magnum6K25(gvrp)## show-vlan
============================================
VLAN ID | NAME | VLAN STATUS
============================================
1 | Default VLAN | Static Active
2 | Blue | Static Active
10 | dyn10 | Dynamic Active
Magnum6K25(gvrp)## static vlan=10
Magnum6K25(gvrp)## show-vlan
============================================
VLAN ID | NAME | VLAN STATUS
============================================
1 | Default VLAN | Static Active
2 | Blue | Static Active
10 | dyn10 | Static Active