GarrettCom MNS-6K-SECURE 14.1.4 Switch User Manual


 
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
SNMP MANAGERS INFO
------------------
SNMP TRAP STATIONS INFO
-----------------------
Magnum6K25# snmp
Magnum6K25(snmp)## community write=private read=public
SNMP Read community name successfully set
SNMP Write community name successfully set
Magnum6K25(snmp)## show snmp
SNMP CONFIGURATION INFORMATION
------------------------------
SNMP Get Community Name : public
SNMP Set Community Name : private
SNMP Trap Community Name : public
AuthenTrapsEnableFlag : enabled
SNMP Access Status : enabled
SNMP MANAGERS INFO
------------------
SNMP TRAP STATIONS INFO
-----------------------
Magnum6K25(snmp)## mgrip add ip=192.168.1.111
Manager IP Address added successfully
Magnum6K25(snmp)## mgrip add ip=192.168.1.222
Manager IP Address added successfully
Magnum6K25(snmp)# show snmp
SNMP CONFIGURATION INFORMATION
------------------------------
SNMP Get Community Name : public
SNMP Set Community Name : private
SNMP Trap Community Name : public
AuthenTrapsEnableFlag : disabled
SNMP Access Status : enabled
SNMP MANAGERS INFO
------------------
IP Address = 192.168.1.111
IP Address = 192.168.1.222
M
anagers added are displayed under the
SNMP information by using the “show
snmp” command
Use this command for SNMP v1 managers.
Without this command SNMP v1 managers
will not be able to manage the switches. Not
needed for SNMP v3. Note – maximum of
5 stations allowed.
245