Filter
Top Products
MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax – addlease ip=<ip> mac=<mac> [leasetime=<lease time (1..10)>] – add a specific host
with a specific IP address
Syntax - reserve-ip ip=<ip> [mac=<mac>] - reserve a specific IP address for a device
Syntax - clear-reserveip ip=<ip> - clear the reverse IP assigned
Syntax - show dhcpsrv <config|status|leases> - display the DHCP server configuration, leases as well
as status
Chapter 6 – SNTP Server
Syntax sntpserver – enter the SNTP Server configuration mode
Syntax sntpsrv <start|stop> - Start or stop the SNTP Services
Syntax show sntpsrv – display the status of SNTP server
Chapter 7 – Access
Considerations
Syntax set password – set or change password
Syntax configure port-security – sets the port authorization based on MAC addresses
Syntax port-security – configure port security settings
Syntax allow mac=<address|list|range> port=<num|list|range> - specify a specific MAC
address or MAC address list
Syntax learn port=<number-list> <enable|disable> - learn MAC addresses connected to the
Magnum 6K switch
Syntax show port-security – display port security settings
Syntax action port=<num|list|range> <none|disable|drop> - action to perform in case of breach
of port security
287