Filter
Top Products
114 Troubleshooting
Printer problems
The printer will not turn on.
The printer is turned on but will not print.
Probable cause Solution
The printer is not connected
to the system
Make sure the data cable is properly
connectedbetween theprinterand thesystem.
Check the connector and cable for bent or
broken pins.
The printer is not plugged in Make sure the power cable is plugged into a
working power source.
The printer is not turned on Make sure the printer’s power switch is
pressed or set to the On position. If power is
applied to the printer, the green power LED
should be illuminated.
The printer is defective Try another printer, if one is available.
Probable cause Solution
The printer is not connected
to the system
Make sure the data cable is properly
connectedbetween theprinterand thesystem.
Check the connector and cable for bent or
broken pins.
The printer is not designated
as the default printer
If the printer that you are trying to print to is
not the default printer, make sure you have
selected it through the program’s printer setup
function.
The printer has not been
added to the system
In the Printers window (Start | Settings |
Printers),double-clickAdd Printer.Followthe
on-screen instructions for adding the new
printer.
The printer is not on-line
(ready)
Make sure the on-line or ready light is on, or
the display indicates “Ready.”
8508366.book Page 114 Tuesday, October 23, 2001 11:29 AM