Gateway 7400 Server User Manual


 
58 Replacing and Adding System Components
To replace the heatsink:
1 Hook the metal clip on the heatsink to the plastic tabs on the processor
socket. Make sure the heatsink is level with the processor and the metal
clips are securely attached.
2 Connect the heatsink fan cable to the fan connector on the system board.
3 Replace the bezel. (See Replacing the bezel on page 28.)
4 Close the case. (See Closing the case on page 27 for instructions.)
5 Reconnect the cords you removed, then turn on the server.
Caution It is very important that the heatsink makes direct contact
with the processor or else it will not cool correctly,resulting
in processor failure.
1.
2.
3.
8508366.book Page 58 Tuesday, October 23, 2001 11:29 AM