Filter
Top Products
Error messages 123
Print queue is full Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Printer is out of paper Add paper to the printer.
Make sure the printer is online.
Required parameter missing Make sure you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit,thenpressE
NTER.
Syntax error Make sure you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
NTER.
Time and date not set Open the BIOS Setup utility, then set the
system date and time.
Write-protect error Move the write-protection tab over the hole on
the back of the diskette.
Error message Solutions
8508366.book Page 123 Tuesday, October 23, 2001 11:29 AM