Filter
Top Products
15
Mounting your server into a cabinet
www.gateway.com
7 Insert the slotted foot of a cabinet rail between each nut bar and post, then
tighten the screws.
8 With the front of the server facing you, lift the server, insert it into the
cabinet from the front, then position the disk guides so they fit in the
cabinet rails.
9 Push the server toward the back of the cabinet until the front of the server
rails touch the front cabinet posts.
Warning Lifting the server and attaching it to the rack is a
two-person job. If needed, use an appropriate lifting
device. A fully loaded Gateway 955 server weighs about
30 lbs. (13.6 kg).