Filter
Top Products
19
Mounting your server into a cabinet
www.gateway.com
6 To lock the front cover, insert the key into the lock and rotate it ¼ turn
clockwise. To unlock it, rotate the key ¼ turn counter-clockwise.
Removing the server from a cabinet
To remove the server from a cabinet:
1 Remove the front cover, if installed.
2 Remove the handles, if installed.
3 While supporting the front of the server, remove the four screws that secure
the server rails to the front cabinet posts.
4 While supporting the server, slide the server away from the cabinet until
it slides off the cabinet rails.
Warning Screws are required to support the front of the server. You
must support the server while removing the front screws
and while sliding the server off the cabinet rails.
Unlock
Lock