Filter
Top Products
93
Resetting the BIOS
www.gateway.com
7 Place a jumper across the CLR/CMOS pins of jumper J1D4, then remove
the jumper. The BIOS settings are cleared.
8 Follow the instructions in “Closing the server case” on page 48.
Resetting BIOS passwords
To reset BIOS passwords, you must reset and clear all BIOS settings. To reset
BIOS passwords, follow the instructions in “Resetting the BIOS” on page 92.
Warning Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
CLR/CMOS
(clear BIOS) pins