Filter
Top Products
41
Using the System Setup Utility
www.gateway.com
11 In the Paging String box, type the telephone number to dial for the page
and the message you want sent with the page. The maximum length for
the paging string is determined at runtime from firmware. You will be
notified if the string is truncated. Following a save, the actual string saved
is displayed in the edit box.
12 Click Options, then click Configure Event Actions.
13 In the Platform Event Paging Actions window, move the events that you want
to generate an alert to the
Enabled column and move all other events to
the
Disabled column using the following buttons:
■ >> Moves all events from the Enabled list to the Disabled list.
■ > Moves the selected event from the Enabled list to the Disabled list.
■ < Moves the selected event from the Disabled list to the Enabled list.
■ << Moves all events from the Disabled list to the Enabled list.
14 Click Save to save the changes.
15 Click Close to return to the PEP Configuration window.
16 To send a test page to verify that you have correctly configured PEP, click
Options, then click Send Alert.
17 Click Save to save the configuration.
18 Click Close to return to the Platform Event Manager window.
Setting up LAN alerts
To set up LAN alerts:
1 Boot your server from the Server Companion CD, then select System Setup
Utility
from the menu. The System Setup Utility starts.
2 In the SSU Main window, click Platform Event Manager (PEM).
3 In the PEM window, click Configure LAN.
4 Click to select the Enable LAN Alerts check box.