Filter
Top Products
49
Installing drives
www.gateway.com
Installing drives
Your server’s basic configuration includes one combination CD/diskette drive
and as many as three SCSI hard drives.
As you prepare to install drives, remember:
■ Before you install a drive, see the drive’s documentation for information
on configuring the drive, setting drive jumpers, and attaching cables.
■ You may need to configure the drives you install using the BIOS Setup
utility. Press F2 at startup to open the BIOS Setup utility.
Replacing the CD/diskette drive in the Flex
Bay
To replace the drive in the Flex Bay:
1 Follow the instructions in “Preventing static electricity discharge” on
page 45.
2 Rotate the combination drive’s locking handle up.
Caution The combination CD/diskette drive is not hot-swappable.
Before removing the drive, make sure that power is turned
off.