Filter
Top Products
87
Replacing the system board
www.gateway.com
13 Replace the three system board screws you removed in Step 8.
14 Reinstall the heat sink brackets.
15 Reinstall the memory, processors, and fan module.
16 Reinstall the riser cards. For instructions, see “Installing PCI expansion
cards” on page 60.
17 Follow the instructions in “Closing the server case” on page 48.
18 Turn on your server, then press F2 when the Gateway logo screen appears
during startup.
19 Check BIOS settings to make sure that they detect the server’s new
hardware, then save your changes (if any) and close the BIOS Setup utility.
20 If your server does not start after installing the new system board, contact
Technical Support. For more information, see “Getting Help” on page 6.