Filter
Top Products
84
Chapter 4: Installing Components
www.gateway.com
Replacing the system board
To replace the system board:
1 Follow the instructions in “Preventing static electricity discharge” on
page 45.
2 Follow the instructions in “Opening the server case” on page 46.
3 Remove the memory modules. For instructions, see “Installing memory”
on page 58.
4 Remove the riser cards. For instructions, see “Installing PCI expansion
cards” on page 60.
5 Remove the fan module. For instructions, see “Replacing the fan module”
on page 64.
6 Remove the heat sinks and processors. For instructions, see “Installing a
processor” on page 67.
7 Disconnect all cables from the system board, noting their locations and
orientation. (You will reconnect the cables after you install the new board.)