Filter
Top Products
Service Tests and Utilities
4-39
HP DesignJets 1050C and 1055CM Printers Service Manual
b If you decided to continue with the test then the following
message will appear on the front panel and you should wait until
the test has been performed.
WARNING DO NOT POWER OFF THE PRINTER WHILE THE TEST IS
BEING PERFOMRED BECAUSE THIS COULD DAMAGE
THE ELECTRONICS MODULE.
c Once the test has been completed, the following message will be
displayed on the front panel.
If you want to Clear the EEROM
a If you want to clear the EEROM, then you should select "Clear
EEROM" and press ENTER. The following message will appear
asking you to confirm the selection. Select ACCEPT if you want
to continue, or select CANCEL if you want to cancel the
operation. Press Enter once the selection has been made.
Please wait.
Testing EEROM.
EEROM tested
Press ENTER to continue
To p
Enter
Back
↑
↓
Press Enter
EEROM Utilities
You will lose all
CANCEL
ACCEPT
To p
Enter
Back
↑
↓
Press Enter
printer settings!
Make Selection