Filter
Top Products
Service Calibrations
5-20
HP DesignJets 1050C and 1055CM Printers Service Manual
CANCEL if you want to cancel the Calibrations Backup. Press Enter
once the selection has been made.
c If you selected to continue, the Calibrations Backup will start to update the
calibrations and the following message will be displayed on the front
panel:
d Once the Calibrations Backup has been completed the following message
will appear on the front panel:
If the Tubes System was replaced
a If the Tubes System was replaced, then select Tubes System and press
Enter.
b The following message will appear asking you to confirm the operation.
Select ACCEPT if you want to continue the Calibrations Backup, or select
CALIBRATIONS BACKUP
Electronics Module
has been replaced?
CANCEL
ACCEPT
To p
Enter
Back
↑
↓
Press Enter
Make Selection
Updating Backup.
Please wait
Press ENTER to continue
To p
Enter
Back
↑
↓
Press Enter
Backup completed.
CALIBRATIONS BACKUP
What have you
replaced?
Electronics Module repl
To p
Enter
Back
↑
↓
Press Enter
Tubes replaced...
Make Selection