Filter
Top Products
Print Quality
6-3
HP DesignJets 1050C and 1055CM Printers Service Manual
Print one of the internal demos or print the Print Quality Test
using HP Media and configuring the printer as indicated
previously.
If the output obtained using the HP Solution is good and the one
obtained through the 3rd party solution is bad, HP support
organization should:
Communicate to the customer that the problem is not in the
printer and that he should address it through the 3rd party vendor
support structure.
7 Service Accuracy Calibration
Perform "Service Accuracy calibration" using HP High-Gloss
Photo Paper.
WARNING Do NOT use any other type of media apart from HP High Gloss
Photo Paper when performing the Accuracy Calibration.
Print Modes
The Printers have a large number of print modes. A print mode
specifies how to interpret and put on media a set of bitmap planes,
each of which consists of a sequence of rows. Each mode
corresponds to a unique combination of the following parameters:
Print resolution (300 dpi, 600 dpi, 1200 x 600 addressable).
Number of passes per advance.
Number of advances per swath.
Print direction (bidirectional).
Carriage speed.
Smart Area Fill (SAF).
Print masks.
Servicing states.
Multiple dotting (K).
User input to print mode selection consists of the following:
Choice of media type.
Choice of print-quality setting (fast, normal, best).
The language in which the file is received.
The model of printer used.
The type of driver (HP or Non-HP).