Filter
Top Products
Service Tests and Utilities
4-40
HP DesignJets 1050C and 1055CM Printers Service Manual
b If you decided to continue with clearing the EEROM, then the
following message will appear on the front panel and you should
wait until the EEROM has been cleared.
WARNING DO NOT POWER OFF THE PRINTER WHILE THE EEROM
IS BEING CLEARED BECAUSE THIS COULD DAMAGE
THE ELECTRONICS MODULE.
c Once the EEROM has been cleared, the following message will
be displayed on the front panel.
d In order to recover the calibrations information, perform the
Calibrations Backup (⇒ Page 5-19).
e Also, if necessary, set the Asian PS Fonts (⇒ Page 4-33),
selecting the Asian PS font that was set before clearing the
EEROM.
Please wait.
Clearing EEROM.
EEROM cleared
Press ENTER to continue
To p
Enter
Back
↑
↓
Press Enter