Filter
Top Products
System Error Codes
2-13
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error: 0A0000
Problem
Description:
The Air Pressure is below the minimum requirement.
Corrective Action: Try the following:
Check all the cables of the APS and make sure they are correctly
connected and are NOT damaged.
Check all the tubes of the APS and Tubes System and make sure
they are correctly connected and are NOT pinched or damaged.
Check that the Air Tube from the APS is correctly connected to
the Tubes System.
Faulty APS Sensor, APS Valve or APS Pump. Replace the
complete APS ⇒ Page 8-20.
Replace ONE Ink Cartridge at a time, checking if the error code
disappears.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0A0010
Problem
Description:
Problem in Pressurizing the Air System.
Corrective Action: Try the following:
Replace ONE Ink Cartridge at a time, checking if the error code
disappears.
Check all the cables of the APS and make sure they are correctly
connected and are NOT damaged.
Check all the tubes of the APS and Tubes System and make sure
they are correctly connected and are NOT pinched or damaged.
Faulty APS Sensor, APS Valve or APS Pump. Replace the
complete APS ⇒ Page 8-20.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.