Filter
Top Products
Removal and Installation
8-66
HP DesignJets 1050C and 1055CM Printers Service Manual
Roller Guide
Refer to Figure 72 to Figure 75.
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the following:
1. "Left Hand Cover" see page 8-13.
2. "Right Hand Cover" see page 8-4.
3. "Electronics Module" see page 8-25.
4. "Ink Supply System Assembly" see page 8-19.
5. "Service Station Assembly" see page 8-8.
6. "Paper-axis Motor Assembly" see page 8-12.
NOTE Working from the rear of the printer.
2. Remove the two T-15 screws (item 1) securing the left hand rear
platen mount (item 2) (refer to Figure 72)
3. Remove the two T-15 screws (item 3) securing the right hand rear
platen mount (item 4) (refer to Figure 72).
Figure 72: Platen Mounts
1
2
4
3