Filter
Top Products
Service Tests and Utilities
4-18
HP DesignJets 1050C and 1055CM Printers Service Manual
2 The test will start and the following message will appear on the
front panel:
3 Once the test is completed, the following message will appear on the
front panel:
4 Press Enter and the following message will appear on the front
panel:
To check if the values displayed after the test are within the limits,
refer to the following table:
SCAN AXIS
Running Scan
Axis Test...
(takes 2mn...)
SCAN AXIS FORWARD
Avg PWM: XXX
Max PWM: XXX
Stabilizat Dist: XXXX
Avg speed offset: XXX
STD speed offset: XXX
SCAN AXIS BACKWARDS
Avg PWM: XXX
Max PWM: XXX
Stabilizat Dist: XXXX
Avg speed offset: XXX
STD speed offset: XXX
Scan-Axis Forward Scan-Axis Backwards
Normal Maximum Normal Maximum
Avg. PWM 165 185 -165 -185
Max. PWM 220 240 220 240
Stabilize Dist. 1800 2400 1800 2400
Avg. Speed offset 2.4 10 2.4 10
STD Speed offset 4.4 10 4.4 10