Filter
Top Products
Removal and Installation
8-11
HP DesignJets 1050C and 1055CM Printers Service Manual
Vacuum Fan
Refer to Figure 6.
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the following:
1. "Right Hand Cover" see page 8-4.
2. "Service Station Assembly" see page 8-8.
2. Disconnect the vacuum fan cable from position P7 VACUUM FAN
on the electronics module.
3. Remove the four T-15 screws (item 1) securing the vacuum fan
assembly (item 2) to the right hand side chassis and remove the
assembly.
Figure 6: Vacuum Fan
C607421
1
1
2