Filter
Top Products
Service Calibrations
5-25
HP DesignJets 1050C and 1055CM Printers Service Manual
NOTE During the Carriage Height Calibration procedure the Carriage
Assembly has to be moved along the length of the printer for
correct calibration. Make sure that the Carriage Assembly is
only ever moved by pulling the belt and never by direct contact
with the carriage itself (See Figure 2 below).
Figure 2
1 Disconnect the Ink Leak Detector Cable Connector from the back of the
printer.
Correct: move using the belt.
Incorrect: never move using Carriage Assembly.