Filter
Top Products
Removal and Installation
8-10
HP DesignJets 1050C and 1055CM Printers Service Manual
Drop Detector Assembly
Refer to Figure 5.
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the Printhead Cleaners (Refer to the User Guide).
2. Remove the following
1. "Right Hand Cover" see page 8-4.
2. "Service Station Assembly" see page 8-8.
3. Disconnect the Drop Detector cable from the Service Station Cable.
4. Remove the screw (item 1) that attaches the Drop Detector
Assembly (item 2) to the Service Station (item 3).
5. Remove the Drop Detector from the Service Station.
Figure 5: Drop Detector Assembly
1
2
3
C607436