Filter
Top Products
78 Using accessories Back to TOC
Scanning from the ADF
You can scan multiple-page items quickly and easily using the ADF.
When you use the ADF, you can scan to the HP Precisionscan Pro
software or other destinations. For instructions about setting up the
ADF, see the Setup and Support Guide. For information about
preparing items for the ADF, see "Items for the ADF" on page 17.
To scan from the ADF
1 Place a stack of similarly sized originals in the document input tray,
face up with the first page on top.
2 Adjust the paper guides to center the stack.
3 Do one of the following:
● Start the HP Precisionscan Pro software and follow the
directions on the computer screen.
● Press a button on the front of the scanner.
If you start the scan from the HP Precisionscan Pro software or
scan to the HP Precisionscan Pro software using the Scan To
button ( ):
a The ADF Scan dialog box opens and displays the current
output type, resolution, and page size, which you can change.
Or, you can click Load Settings and choose settings you have
preset.
b To scan the item to a file, click Scan. Or, to scan directly to a
destination, click Scan To, select a destination, and click Scan.
If you start the scan from any scanner button except the Scan To
button, follow the directions on the screen to complete the scan.