Filter
Top Products
4
11
use the copy features
The copy features let you do the following:
• Produce high-quality color and black-and-white copies using a variety of
paper types and sizes, including iron-on transfers.
• Reduce or enlarge the size of the copies you make from 25% to 200% of
the copy’s original size. This varies based on your HP Officejet model.
• Make the copy lighter or darker, adjust the color intensity, select the
number of copies, and specify the quality of the copies you make.
• Use special copying features to make many sizes of photos, make high-
quality copies of photos using special photo paper, or create
transparencies.
make copies
You can make copies using the front panel of your HP Officejet or by using the
HP Officejet software on your computer. Many copy features are available using
either method. However, you may find that the software offers easier access to
special copy features.
All copy settings that you select on the front panel are reset two minutes after the
HP Officejet completes the copy, unless you save the settings as the default
settings as described in change settings for all copy tasks on page 13.
make a copy
1 Load the input tray with the appropriate paper.
For more information, see load paper on page 7.
2 Load your original in the ADF.
For more information, see load originals on page 7.
3 If you want to make more than one copy (the default), do the following:
a. Press C
OPY.
b. After Number of Copies appears, use the keypad or arrow keys to
enter the number of copies, and then press E
NTER.
For more information, see set the number of copies in the onscreen User’s
Guide. You can make up to 99 copies.
4 If you are using anything other than plain paper, do the following:
a. Press C
OPY until Paper Type appears.
b. Press until the appropriate paper type appears, and then press
E
NTER to select it.
5 Press the C
OPY button and arrow keys to change any other applicable
settings, such as reduction or enlargement.
6 Press S
TART, BLACK or START, COLOR.