Filter
Top Products
96
Working with Action Tables
To send messages based on alarms generated by a HP Server or other
serial device, an Action Table must be created in the terminal server. The
terminal server compares all alarm messages against the alarm list in the
Action Table. If a match is found, the associated action is taken.
When building an Action Table, you should first consider the following
things:
1. The alarms to be monitored.
2. The actions to be taken when an alarm is received.
Structure of an Action Table
The Action Table consists of a list of alarms, the requested action (Action
Routine), parameters associated with the action, and comments.
A typical Action Table is shown below.