Filter
Top Products
80
Field Function
Press the space bar until the desired choice
is displayed. When your choice appears in
the field, press Enter
key to make your
selection.
Available selections are 1 min, 5 min, 10
min, 20 min and none.
Host Session Idle Timer
The Host Session idle timer defines the
maximum duration of inactivity time during a
Host session before the call is terminated
and the modem is reset.
Press the space bar until the desired choice
is displayed. When your choice appears in
the field, press the Enter key to make your
selection and advance to the next parameter.
Available selections are 1 min, 5 min, 10
min, 20 min, none.
Host Session Disconnect
on Ctrl + A
Initially Yes appears on the screen. Press
the space bar to toggle to No.
Setup
Defines the AT command string used to set
up the modem. You may edit this field,
depending on your modem requirements.
NOTE: The factory defaults shown on
page 5-2 are specific for the installed
modem. If the terminal server includes a
modem of a different make or model, a
different command string is required.
Consult the modem manual to determine
the appropriate command string.
Answer
Defines the AT Command string used to
answer calls. This should be either ATA